The Second row of Landscaping. Remember the Steps: Remove Paper Pattern Piece(s), Place Fabric on the Adhesive, Pin the Paper Pattern Pieces in Place, Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way. 
Cut a straight line up the Fence Post, then isolate one piece at a time and work the piece through all the steps.
Continue until all 4 Pieces have been covered.
When the Right Side is complete – move to the Left Side. 
Now it’s time to work on the Third Row of Landscaping. Remove the 4 Paper Pattern Pieces. 
Place the Fabric on the Adhesive, Pin the Paper Pattern Pieces in Place, Isolate the far Right Piece; Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way.
Continue working individual Pieces Following all the Steps; Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way. 
Once the Pieces on the Left are completed – it’s time to work the Right Side. Remove 4 Pattern Pieces.
Place the Fabric over the Adhesive. Then Pin the Paper Pattern Pieces over the Fabric
Follow the Steps for each Individual Pieces. Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way. 
Continue until all Pieces have been completed.
It’s time to start the Driveway. Remove the 2 Driveway Paper Pattern Pieces. Place Fabric over the Adhesive. 
Work the Small Piece of the Driveway first.
Follow the Steps for the Small Driveway Piece and the Main Driveway; Pin the Paper Pattern Pieces in Place, Isolate the far Right Piece; Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way.
Then Start the Fence Posts and Fence. Treat each Piece of the Fence individually. Follow the Steps: Remove the Paper Pattern Pieces, Place Fabric on the Adhesive, Pin the Paper Pattern Pieces in Place, Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way.
Then complete the Fence on the Left side. 
On to the Sky. Remove the Paper Pattern Piece and Place Fabric over the Adhesive.
This is a Large Piece. To gauge where the Paper Pattern Piece belongs – Gently Tuck the Fabric on Both Sides at the Corner. Then Pin Paper Pattern Piece in Place.
Work the outer edges going through the steps: Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way. Then work the inside areas; Gently Tuck the Fabric into the Grooves, Clip, Trim, Lint Roller and Tuck the Fabric in all the Way
Complete the Sky and then we’ll start the Barn Quilt.
